The hottest steel market shrank, and the pump and

The steel market shrank, and the pump and valve industry suffered a fatal blow

in recent years, China's pump and valve industry has developed rapidly. Not only the production level of pump and valve has been greatly improved, but also its output has increased significantly. However, it is embarrassing that small and medium-sized and private pump and valve enterprises have increased in this process, accounting for a large proportion. However, there are few large pump and valve enterprises, and the domestic pump and valve industry is not well branded and has poor market competitiveness. In recent years, China's pump and valve industry has developed rapidly. Not only the production level of pump and valve has been greatly improved, but also its output has increased significantly. However, it is embarrassing that small and medium-sized and private pump and valve enterprises have increased more in this process, accounting for a larger proportion in the specific process. However, there are few large pump and valve enterprises. The brand of domestic pump and valve industry is not strong in recent two years, and the market competitiveness is poor

from the development status of the pump and valve industry, the pump and valve industry itself is also facing the risk of eliminating backward production capacity; Under the influence of the financial crisis, the market of steel, construction and its upstream and downstream industries shrank sharply, which is undoubtedly a fatal blow to the pump and valve industry, which depends on the development of these industries

although the financial crisis has had a negative impact on China's pump and valve industry to a certain extent, it has also exposed the shortcomings within the pump and valve industry. Under the market economic system, the survival of the fittest has been greatly improved; The domestic market of pump and valve industry in China is very broad, while the export market is slightly thin. These are the resistance factors affecting the development of hardware pump and valve industry

it is understood that at present, in the domestic market of stainless steel stamping centrifugal pumps, foreign-funded enterprises will also produce the phenomenon of damage caused by metal fatigue, accounting for about 50%, while the market share of Nanfang pump industry is about 12%, ranking first among domestic enterprises. The performance of stainless steel stamping centrifugal pumps produced by some Chinese enterprises is close to that of similar foreign products, but the price is only about 40% of that of foreign products. The market space brought by import substitution has enabled the company to grow against the trend

in recent years, China's general machinery industry has made great progress, especially the technical level of products such as pumps and valves has been continuously improved, and it can provide some medium and high-end products for the market. In 2011, China's water pump and valve manufacturing enterprises above Designated Size achieved a main business income of 435.9 billion yuan, an increase of 28.41% year-on-year; The total profit reached 49.086 billion yuan, a year-on-year increase of 28. Related introduction to metallographic microscope calibration steps 71%.

but generally speaking, the industrial concentration of China's pump and valve market is low, mainly producing medium and low-end products. In terms of core technology, there is still a certain gap between domestic enterprises and developed countries in the world. According to statistics, the apparent consumption of valves in China in 2010 was about 12billion US dollars, of which the import volume was about 2.3 billion US dollars. It can be seen that there is still much room for import substitution

competition is both a challenge and a development opportunity for enterprises. In the face of such a huge development market, domestic pump and valve enterprises should seize this development opportunity to create their own brands by optimizing the industrial structure, improving product quality, and paying close attention to sales, so as to produce pump and valve equipment comparable to the international market